How to Source Interlining Fabric for Bulk Garment Orders

Bulk sourcing of interlining fabric requires more than asking for a general product name. Garment manufacturers should define the technical requirements first so that the material supplied matches the intended production application. This becomes especially important when purchasing several grades for different garment sections.

Start with construction. Woven interlining is commonly selected for suit, blazer and sherwani bodies because its woven polyester structure provides strong shape retention. Non-woven material is lighter and can be used for collars, cuffs, plackets and other smaller areas. Double Ghoda supplies both woven and non-woven options for garment manufacturing.

Next, specify GSM. The woven range covers 30–150 GSM, while the non-woven range covers 30–82 GSM. Width and roll length should also be included in the purchasing specification. Double Ghoda lists woven material at 150 cm width and 50 metres per roll, while its non-woven range is 100 cm wide with longer roll lengths.

A good sourcing specification can therefore include the following information: garment application, woven or non-woven construction, required GSM, colour, width, coating, roll quantity and destination. If the material will be fused using factory pressing equipment, the required temperature, time and pressure should also be validated during sampling.

For manufacturers buying interlining fabric in volume, consistency between batches is another important consideration. Variations in GSM, coating or hand feel can affect production results. Double Ghoda states that its products undergo quality inspections covering factors such as shade consistency, shrinkage and bonding strength, with core SKUs stocked at its Bhiwandi warehouse.

A detailed purchase specification makes supplier communication clearer and gives the production team a practical reference when materials arrive. It also makes comparing quotations between suppliers much easier.